The GE drive control board supports expansion of communication interfaces such as EtherNet/IP and 1203-USB/SSS converters by mounting auxiliary cards (such as network cards and signal processing cards) via a bracket. This enhances its interconnectivity with host computers, PLCs, or other devices. It also supports multi-task parallel processing:integrating three microprocessors, it supports real-time completion of motor control mathematical calculations (such as PID regulation and speed/torque control), system status monitoring, and communication protocol processing, ensuring accurate response of the turbine/drive under complex operating conditions.

　　Many products are not yet listed. Please contact us for more product information.

　　If the product model differs from the displayed image, the model number shall prevail. Please contact us for specific product images; we will arrange to take photos in our warehouse for confirmation.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours to return an accurate product. We apologize for any inconvenience. Of course, we will respond to your inquiries as soon as possible.

　　DS200RTBAG2AHC Other Names:

　　PCB Board DS200RTBAG2AHC 

　　DS200RTBAG2AHC Input/Output Board

　　Communication Board DS200RTBAG2AHC

　　Other Names:

　　The DS200RTBAG2AHC is a GE (General Electric) Mark V/VIe series drive control board. As the core communication module of a gas turbine control system, its technical characteristics and application scenarios are as follows:

　　Core Control Functions

　　Multi-task Parallel Processing: Integrates three microprocessors, supporting real-time completion of motor control mathematical calculations (such as PID regulation, speed/torque control), system status monitoring, and communication protocol processing, ensuring accurate response of the turbine/drive under complex operating conditions.

　　Parameter Storage and Configuration: Equipped with 5 EPROM connectors, 4 of which store factory default configurations (such as motor start-up curves and protection thresholds), and 1 stores user-defined parameters (such as PID parameters and communication addresses used in field debugging). Parameter backup, restoration, and firmware upgrades (e.g., version v4.002) are supported via the DriveExecutive tool.

　　Hardware Expansion and Interfaces

　　Modular Expansion: Supports expansion with EtherNet/IP, 1203-USB/SSS converters, and other communication interfaces via bracket mounting, enhancing interconnectivity with host computers, PLCs, or other devices.

　　Physical Interface: Standard size 170mm × 105mm × 32mm, compatible with Mark V series rack mounting, operating temperature range -20°C to +50°C, storage temperature range -40°C to +70°C, humidity tolerance 5%-95% (non-condensing), suitable for harsh industrial environments.

　　Firmware and Software Compatibility

　　Firmware Management: Firmware updates require the DriveExecutive tool. Before updating, parameters must be backed up using DriveExplorer or HIM CopyCat to avoid configuration loss. Remote firmware upgrades are supported using the ControlFLASH tool to ensure system version consistency.

　　Compatibility Verification: Belongs to the Mark V DS200 series G5 version, differing from G1, G3, and G4 versions. It has been gradually replaced by the DS215SDCC board. However, due to component differences, the DS215 is not backward compatible; compatibility with replacement models (such as DS200TCQAG1A) must be verified.

　　Application Scenarios and Compatibility

　　Main Uses: Used in Mark V/VIe distributed control systems to manage key functions such as gas turbine speed, combustion monitoring, and vibration protection. Widely used in industrial scenarios such as power generation, petrochemicals, and oil and gas extraction.

　　Versions and Replacements: Versions G1/G3/G4/G5 exist (G2 is not in mass production). Some models, such as DS215SDCC, can replace older versions, but compatibility issues should be noted (newer boards may not be backward compatible). Users must select the correct version based on their specific application to avoid configuration conflicts.

　　Repair and Troubleshooting

　　Common Problems:

　　Hardware Failures: Such as microprocessor damage, EPROM data loss, poor connector contact.

　　Software Issues: Firmware version mismatch, incorrect configuration parameters.

　　Environmental Factors: High temperature, high humidity, electromagnetic interference leading to performance degradation.

　　Solutions:

　　Use ControlFLASH tool to upgrade firmware, following official procedures to avoid parameter loss.

　　Check auxiliary card connections, ensuring the bracket is secure and the cables are undamaged.

　　Clean the touchscreen or control board surface to remove dirt/foreign object interference.

　　Electromagnetic interference issues require isolating the interference source or adding shielding measures.

　　In summary, the DS200RTBAG2AHC, as the core of GE's industrial control system, achieves high-precision motor control and system reliability through its multi-processor architecture, modular expansion, and firmware management capabilities.

　　All products on this website are special products, and market prices are constantly fluctuating.

　　Please refer to customer service for a quote, as the price is not accurate as it may be for new products.

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. This website is currently in use.

　　New products are available for sale; please contact customer service for further information.

Recommended related products:
GE DS200DTBCG1AAA
GE DS200DTBAG1AAA
GE DS200TBQBG1ACB
GE  DS200PTBAG1ADC
GE DS200PTBAG1A
GE DS200EXPSG1AAA
GE DS200LPPAG1ABA
GE DS200RTBAG3A
GE DS200SLCCG1ADC
GE DS200PTBAG1BAA
GE DS200FGPAG1A-KD
GE IS200TDBSH2AAA
GE IS200VTURH1BAA
GE IS200EPSMG1ABB
More......