This device is an industrial-grade communication management unit installed at the station control layer of substations, power plants, or large industrial facilities, serving as the communication hub and data concentrator for the entire system. It connects to and collects data from various intelligent electronic devices such as protection relays, power quality monitors, meters, PLCs, and RTUs via four Ethernet ports and six serial ports (RS232 or RS485).

　　Many products are not yet listed. Please contact us for more product information.

　　If the product model differs from the displayed image, the model number shall prevail. Please contact us for specific product images; we will arrange to take photos in our warehouse for confirmation.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours to accurately return the information to you. We apologize for any inconvenience. Of course, we will respond to your inquiries as soon as possible.

　　This device is an industrial-grade communication management unit installed in the station control layer of substations, power plants, or large industrial facilities, operating as the communication hub and data concentrator of the entire system. It connects to and collects data from various intelligent electronic devices such as protective relays, power quality monitors, meters, PLCs, and RTUs through four Ethernet ports and six serial ports (RS232 or RS485). It supports over thirty industrial communication protocols, including IEC 61850 (including GOOSE and MMS), DNP3.0, Modbus RTU and TCP, IEC 60870-5-101 and 104, IEC 62439-3, etc., enabling seamless data exchange between devices from different manufacturers and using different protocols, thus solving the problem of information silos.

As a remote control communication gateway, it can communicate with the SCADA or EMS system of the upper-level dispatch center as a master station or slave station, uploading real-time data, event alarms, and fault waveform files, while simultaneously receiving remote control and remote adjustment commands. It has a built-in high-performance processor and large-capacity storage, supporting the storage and forwarding of event logs, SOE sequential event logs, and COMTRADE format fault waveforms. It possesses programmable logic control capabilities, enabling the execution of local automation logic such as interlocking and sequential control. It adopts a fanless design, with an operating temperature range of -40°C to +70°C, and supports dual power supply redundancy input of 88-300V DC or 85-264V AC, ensuring uninterrupted critical communication channels. It has a built-in firewall, user rights management and security log, complies with network security standards such as NERC CIP, can be configured, programmed, monitored and diagnosed through GE Enervista software, and supports online firmware upgrades.

Recommended related products:
IS400JPDHG1ABB GE
IS410JPDHG1A GE
IS400JPDHG1ABB GE
IS410SRLYS2A GE 
IS400SRLYS2ABB GE
IS410SRLYS2A GE 
IS410STAIS2A GE
IS400STAIS2AED GE
IS410STAIS2A GE
IS400STCIS2AFF GE
GE IS415UCVHH1A
More......